Getting Started With ESPHome Workshop: Difference between revisions
Created page with "= Getting Started With ESPHome: From Zero to Cool workshop = == Abstract == This hands-on workshop introduces participants to ESPHome, an open-source platform for integrating ESP32 microcontrollers with home automation systems. Participants will learn the fundamentals of configuring ESPHome YAML files to control inputs and outputs, connect to Wi-Fi, enable remote access, perform over-the-air (OTA) updates, integrate with Home Assistant, and add external sensors or comp..." |
(No difference)
|
Revision as of 22:50, 22 July 2025
Getting Started With ESPHome: From Zero to Cool workshop
Abstract
This hands-on workshop introduces participants to ESPHome, an open-source platform for integrating ESP32 microcontrollers with home automation systems. Participants will learn the fundamentals of configuring ESPHome YAML files to control inputs and outputs, connect to Wi-Fi, enable remote access, perform over-the-air (OTA) updates, integrate with Home Assistant, and add external sensors or components. Attendees will walk away with the knowledge to create their own simple IoT solutions using ESPHome. No programming or soldering skills are required, making this workshop highly accessible to beginners and anyone curious about home automation.
Day / Time / Location
Day 2, Saturday, 16-August-2025, 5:00pm - 6:30pm
Tobin 219 (Workshop A)
Full Description
Registration -- NOT required
NOTE: You do NOT need to register to take this workshop
-- please show up early to ensure a seat at Tobin 219 (Workshop A).
Presenter(s)
Vinicius Fortuna
Materials
Any materials needed to participate in this workshop will be available at-cost.
Observers are welcome at no cost.
To do the hands-on portion for this workshop:
Materials Cost: $10-15, or non cost if you bring your own ESP32 dev board
Required Software / What to bring
laptop with ESPHome and text editor (Visual Code Studio recommended) installed
